ATV310HU22N4E Schneider Electric(44)

ATV310HU22N4E

Schneider ATV310HU22N4E;Schneider ATV310 Inverter;ATV310HU22N4E Inverter;Schneider 2.2kW Inverter;Modbus RTU Inverter;Inverter with Vector Control;Inverter with 150% Braking Torque

	Three-phase 380-460V AC
	50/60Hz ±5%
	2.2kW (3hp)
	0.5-400Hz
	IP20
	66.32W
	105×143×151mm
	Vertical ± 10 degrees

The ATV310HU22N4E is a high-performance model in Schneider Electric's ATV310 series that is specifically designed for small industrial equipment. It provides precise power matching at 2.2 kW (3 hp) and intelligent control, making it an ideal driving solution for fans, water pumps, conveyors, and other devices.

The ATV310HU22N4E inverter has built-in wide voltage adaptability technology for 380-460V, allowing for input voltage swings of up to 15%. It can work reliably in aged power systems or remote places without the use of additional voltage stabilizing devices. With CE certification and an EMC Class C3 anti-interference design, it guarantees zero signal distortion even in workshops with high electromagnetic interference, ensuring precise control.

The ATV310HU22N4E uses a flux vector control technique to achieve an ultra-wide speed control range of 0.5-400 Hz with an accuracy of ±0.5%. With 0.01 Hz micro-adjustment, it entirely removes low-speed jitter concerns.

The ATV310HU22N4E natively supports the Modbus RTU protocol, which allows for simple connection with PLCs and SCADA systems via a two-wire RS485 interface and real-time uploading of 12 operational parameters like as frequency, current, and temperature. Its four programmable digital input terminals can be designed to serve as emergency stop switches, multi-speed switching, or safety interlock signals, satisfying the complicated control needs of small production lines.

Q: Can the DI5 of the Schneider ATV310HU22N4E inverter receive a 100 kHz encoder signal?

A: The ATV310HU22N4E inverter's DI5 input can accommodate a maximum frequency of 30 kHz. High-frequency signals require an external frequency divider.

Q: How can remote monitoring of the ATV310HU22N4E inverter be achieved?

A: To enable remote monitoring of the ATV310HU22N4E inverter, its integrated Modbus communication protocol can be used. All communication devices, such as PLCs, industrial computers, and IoT gateways, must have their configured station number, baud rate, parity, and other Modbus communication parameters consistent with those of the inverter; otherwise, normal communication will not be possible. Network security is critical when conducting remote monitoring;

Q: Does a 2.2 kW nominal power inverter need to be derated when driving a 3 hp centrifugal pump?

A: When driving a 3 hp centrifugal pump, an inverter with a nominal output of 2.2 kW is typically not required to be derated.

Populära Taggar: atv310hu22n4e schneider electric, China atv310hu22n4e schneider electric suppliers, PLC -modul för datainsamling, HMI för konstgjorda intelligensapplikationer, PLC för lagerhanteringssystem, Materialhantering HMI, Anti-bländfilmer hmi, Pekskärm för tillverkning

ATV310HU22N4E Schneider Electric

ATV310HU22N4E Schneider Electric(44)

Du kanske också gillar

Skicka förfrågan